LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1154 (Engine -- 4.6L (2V)) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cooling fan and shroud. For additional information, refer to ENGINE COOLING .
  2. Rotate the tensioner clockwise and remove the drive belt.
    Fig 1: Rotating Accessory Drive Belt Tensioner Clockwise
    G03886148Courtesy of FORD MOTOR CO.
  3. Use the special tool to hold the crankshaft pulley and remove the crankshaft pulley bolt.
    Fig 2: Removing Crankshaft Pulley Bolt
    G03947597Courtesy of FORD MOTOR CO.
  4. Use the special tool to remove crankshaft pulley.
    Fig 3: Removing Crankshaft Pulley Using Special Tool
    G03919906Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals