LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1153 (Engine -- 4.0L SOHC) >> In-Vehicle Repair >> Valve Seals >> Installation

Valve Seals: Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the valve seals with clean engine oil.
    Fig 1: Installing Valve Seal Using Special Tool
    G03947069Courtesy of FORD MOTOR CO.
  1. Using the special tool, install the valve seal.
  2. Install the valve springs. For additional information, refer to VALVE SPRINGS .
scientia non olet · About LEMON Manuals