LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1153 (Engine -- 4.0L SOHC) >> In-Vehicle Repair >> Crankshaft Rear Seal >> Removal

Crankshaft Rear Seal: Removal

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flexplate. For additional information, refer to FLEXPLATE .
  2. Remove the spacer plate.
  3. Remove the flexplate-to-crankshaft spacer.
    4. CAUTION: Avoid scratching or damaging the crankshaft rear seal running surface during removal of the crankshaft rear seal.
    Fig 1: Removing Crankshaft Rear Seal Using Special Tool
    G03947107Courtesy of FORD MOTOR CO.
  4. Using the special tool, remove the crankshaft rear seal.
scientia non olet · About LEMON Manuals