LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1150 (Rear Drive Axle/Differential -- Ford 8.8-Inch Ring Gear) >> In-Vehicle Repair >> Stub Shaft Pilot Bearing and Seal >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS SPECIFICATIONS

G03960920
Remover, Bearing Cup 308-047 (T77F-1102-A)
G03885061
Slide Hammer 100-001 (T50T-100-A)
G03944172
Installer, Halfshaft Pilot Bearing 205-504
G03928608
Adapter for 303-224 (Handle) 205-153 (T80T-4000-W)
G03944174
Installer, Wheel Speed Sensor Ring 206-034 (T88P-20202-A)