Rear Disc Brake: Removal
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the brake pads. For additional information, refer to BRAKE PADS .
- Remove the brake disc.
NOTE:
If the brake disc binds on the parking brake shoe and lining, remove the adjustment hole knockout panel or access plug and contract the parking brake shoe and lining.
NOTE:
If the brake disc cannot be removed easily, apply rust penetrant on the brake disc-to-hub mating surfaces.