LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1149 (Rear Disc Brake System) >> Removal And Installation >> Rear Brake Caliper >> Installation

Rear Brake Caliper: Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake caliper and install the 2 bolts.
    • Tighten to 32 Nm (24 lb-ft).
  2. Using 2 new copper washers, position the brake flexible hose and install the flow bolt.
    • Tighten to 35 Nm (26 lb-ft).
  3. Bleed the system. For additional information, refer to BRAKE SYSTEM-GENERAL INFORMATION .
  4. Test the brake system operation.
scientia non olet · About LEMON Manuals