Removal and Installation
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 4 DVD player screws.
- Pull down on the sides of the DVD player and disengage the clips from the bracket.
- Disconnect the electrical connector and remove the DVD player.
- To install, reverse the removal procedure.
NOTE:
Open the video display door to access the screws.
NOTE:
The DVD player assembly must be supported while disengaging the clips.