LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1124 (Instrument Panel And Console) >> Removal And Installation >> Instrument Cluster Finish Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust the steering column to the full TILT-DOWN position.
  2. Remove the 2 instrument cluster finish panel screws.
  3. Release the locking tabs on the steering column upper shroud located behind the steering wheel.
    Fig 1: Locating Locking Tabs On Steering Column Upper Shroud Located Behind Steering Wheel
    G03989206Courtesy of FORD MOTOR CO.
  4. Remove the instrument cluster finish panel and the steering column upper shroud as an assembly.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals