LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1119 (Seat System) >> Removal And Installation >> Seat Backrest - Third Row, Bench >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the backrest trim cover lower J-strip, open the trim cover and release the inner J-clips.
  2. Roll the backrest trim cover up, remove the 4 backrest latch-to-backrest frame bolts and remove the backrest frame.
    • To install, tighten to 50 Nm (37 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals