Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

Open the wiper pivot arm nut cover.

Fig 1: Removing Wiper Pivot Arm Nut Cover
Courtesy of FORD MOTOR CO.
Remove the nut and the wiper pivot arm.
- To install, tighten to 25 Nm (18 lb-ft).
  
  Fig 2: Removing Nut And The Wiper Pivot Arm
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- Adjust the wiper pivot arms. For additional information, refer to WINDSHIELD WIPER BLADE AND PIVOT ARM ADJUSTMENT .