LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1113 (Wiper System & Washer System) >> Diagnosis And Testing >> Wipers and Washers >> Pinpoint Tests >> Pinpoint Test B: The Rear Window Wiper Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation the rear window wiper motor (Freestyle only) receives power through circuit 406 (BN/WH) and is grounded through circuit 1205 (BK). The rear window wiper motor receives open and ground inputs from the wiper switch through circuits 485 (PK/BK) and 488 (DG) to activate the rear window wiper to the one of the two available intermittent speeds. The rear window wiper motor has a safety override which stops the rear wiper motor if it is operating when the liftgate is opened. The rear wiper motor monitors the position of the liftgate through circuit 700 (WH/PK), which is normally connected to ground through the liftgate ajar switch when the liftgate is closed. When the liftgate is opened, ground is disconnected from circuit 700 (WH/PK) by the liftgate ajar switch, and the rear window wiper motor stops until the liftgate is closed.