LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Air Bag Restraint Systems) >> Removal & Installation >> Seat Belt PRETENSIONERS >> Removal

Seat Belt PRETENSIONERS: Removal

WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Using Seat Belt Bolt Bit (501-010), remove lower seat belt anchor bolt.
  2. Remove B-pillar trim insert and guide seat belt through trim panel. Pull out and release seat belt web guide pin-type retainers. Using seat belt bolt bit, remove seat belt retractor mounting bolt. Pivot seat belt retractor upward to disengage locating tab, and remove retractor/pretensioner assembly.
scientia non olet · About LEMON Manuals