LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1108 (Exterior Lighting System) >> Removal And Installation >> Side Lamp/Front Turn Signal Lamp Bulb >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the screws and position the fender splash shield aside.
  3. Remove the side lamp/front turn signal lamp bulb.
    • Disconnect the electrical connector.
    • Remove the bulb from the socket.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals