Instrument Cluster Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1202 | Fuel Sender Circuit Open | Instrument Cluster | GO to PINPOINT TEST B . |
| B1204 | Fuel Sender Circuit Short To Ground | Instrument Cluster | GO to PINPOINT TEST B . |
| B1205 | Instrument Cluster Switch Number 1 Assembly Circuit Failure | Instrument Cluster | Refer to INFORMATION AND MESSAGE CENTER to continue diagnosis of the message center. |
| B1317 | Battery Voltage High | Instrument Cluster | Refer to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1318 | Battery Voltage Low | Instrument Cluster | Refer to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1342 | ECU is Defective | Instrument Cluster | INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1868 | Lamp Air Bag Warning Indicator Circuit Failure | Instrument Cluster | INSTALL as new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1870 | Lamp Air Bag Warning Indicator Circuit Short to Battery | Instrument Cluster | INSTALL as new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B2143 | NVM Memory Failure | Instrument Cluster | CLEAR the DTCs. REPEAT the self-test. If DTC is still present, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B2477 | Module Configuration Error | Instrument Cluster | Refer to MODULE CONFIGURATION to continue diagnosis of the configuration. |
| B2627 | Fuel Sender Circuit Open #2 | Instrument Cluster | GO to PINPOINT TEST B . |
| B2628 | Fuel Sender Circuit Short To Ground #2 | Instrument Cluster | GO to PINPOINT TEST B . |
| B2675 | Trip Reset Button Stuck | Instrument Cluster | VERIFY that the instrument cluster bezel is aligned correctly and the SELECT/RESET button is not binding. REPAIR as necessary. If the switch is not binding, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B2879 | Fuel Tank Jetpump Fault | Instrument Cluster | GO to PINPOINT TEST B . |
For a complete list of instrument cluster DTCs, refer to MULTIFUNCTION ELECTRONIC MODULES .