LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Air Bag Restraint Systems) >> Removal & Installation >> Passenger-Side Air Bag Module >> Removal

Passenger-Side Air Bag Module: Removal

WARNING: This page is about a different car, the 2002 Lincoln Navigator and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Passenger-side air bag module is located in right side of instrument panel above glove box. Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Release passenger-side air bag module electrical connector pin-type retainer. See Figure . Remove passenger-side air bag module upper mounting bolt. Open glove box door. Push in 2 glove box door tabs and position door fully downward. Remove passenger-side air bag module lower mounting bolts and air bag module. See Figure .