LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Removal, Overhaul & Installation - Gasoline) >> Fuel System >> Upper Intake Manifold >> Removal (3.8L)

Removal (3.8L)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cowl. Remove air cleaner outlet tube. Disconnect accelerator and speed control cables. Position accelerator cable bracket aside. Disconnect IAC and TPS connectors. Disconnect evaporative emission return tube. Remove fuel line retaining clip and wire harness retainers. Disconnect brake booster vacuum hose. Disconnect electronic vacuum regulator connectors. Disconnect all vacuum hoses.
  2. Disconnect EGR sensor, PCV hose, and spark plug wires. Remove upper intake manifold bolts. Remove upper intake manifold. Remove upper intake manifold spacer.
scientia non olet · About LEMON Manuals