LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Removal, Overhaul & Installation - Gasoline) >> Fuel System >> Upper Intake Manifold >> Removal (3.0L Ranger)

Removal (3.0L Ranger)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove air cleaner outlet tube. Disconnect accelerator and cruise control cables from throttle body.
  2. Disconnect harness connectors from throttle body and upper intake manifold. Remove EGR valve. Disconnect vacuum hoses from EGR valve and EGR solenoid. If necessary, remove bolts and throttle body.
  3. Remove ignition coil mounting bolts and coil assembly. Remove EGR transducer. Disconnect evaporative emissions hose. Evenly loosen 3 bolts and 3 stud bolts. Remove upper intake manifold.
scientia non olet · About LEMON Manuals