LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Removal, Overhaul & Installation - Gasoline) >> Fuel System >> Fuel Rails & Injectors >> Removal (3.3L Villager)

Removal (3.3L Villager)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. To remove rear fuel injectors, remove upper intake manifold. See UPPER INTAKE MANIFOLD . Disconnect spark plug wires. Remove air tube screws and hose clamps. Disconnect fuel injector electrical connector. Move fuel injector harness aside. Remove fuel injector screws. Remove fuel injector(s).