LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Removal, Overhaul & Installation - Gasoline) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) Inputs >> Fuel Level Input

Fuel Level Input

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

The fuel level input (FLI) is a hard wire signal input to the PCM from the fuel pump (FP) module. Refer to the description of the FLI in the On-Board Diagnostics II Monitors.

scientia non olet · About LEMON Manuals