LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1097 (Anti-Lock Brake System) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Test G: DTC C1300 - ABS Hydraulic Pump Motor Circuit Failure >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

The operating voltage required to supply the hydraulic pump motor is in a range between 10 and 16 volts.

Voltage to the anti-lock brake system (ABS) motor is supplied by circuit 534 (YE/LG) (hot at all times). Ground is provided through circuit 1205 (BK).

scientia non olet · About LEMON Manuals