LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1082 (Windows And Glass) >> Diagnosis And Testing >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test D: A Single Power Window Is Inoperative - LH or RH Rear >> Rear Window Operation From LH Front Switch

Rear Window Operation From LH Front Switch

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

When the LH rear power window is operated in the up direction from the LH front window control switch, power is sent to the LH rear window control switch through circuit 2015 (GY/BK), which transfers power to the LH rear window motor through circuit 884 (YE/BK). Ground is provided to the LH rear window switch through circuit 2014 (YE/LB), which transfers ground to the LH rear window motor through circuit 885 (YE/LB).

During LH rear power window down operation from the LH front window control switch, power is sent to the LH rear window control switch through circuit 2014 (YE/LB), which transfers power to the LH rear window motor through circuit 885 (YE/LB). Ground is provided to the LH rear window switch through circuit 2015 (GY/BK), which transfers ground to the LH rear window motor through circuit 884 (YE/BK).

When the RH rear power window is operated in the up direction from the LH front window control switch, power is sent to the RH rear window control switch through circuit 2013 (YE/BK), which transfers power to the RH rear window motor through circuit 882 (BN/YE). Ground is sent to the RH rear window switch through circuit 2012 (RD/BK), which transfers ground to the RH rear window motor through circuit 881 (BN).

During RH rear power window down operation from the LH front window control switch, power is sent to the RH rear window control switch through circuit 2012 (RD/BK), which transfers power to the RH rear window motor through circuit 881 (BN). Ground is sent to the RH rear window switch through circuit 2013 (YE/BK), which transfers ground to the RH rear window motor through circuit 882 (BN/YE).