LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1081 (Automatic Transmission - 6 Speed) >> General Procedures >> Torque Converter Contamination Inspection >> Material

Torque Converter Contamination Inspection: Material

WARNING: This page is about a different car, the 2005 Mercury Montego and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION CHART

Item Specification
Motorcraft Premium Automatic Transmission Fluid XT-8-QAW (US); CXT-8-LAW12 (Canada) WSS-M2C924-A
  1. If a new or remanufactured torque converter is not being installed, the following procedures must be carried out:
    • The torque converter must be thoroughly cleaned.
    • Torque converters with drain plugs can be cleaned by using a suitable torque converter/fluid cooler cleaner.
    • Torque converters without drain plugs can be cleaned by hand. Partially fill the torque converter using only recommended transmission fluid for the applicable transmission. Hand agitate the torque converter and then thoroughly drain the fluid. Refill the torque converter with new fluid specified for transmission and reinstall.