LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1081 (Automatic Transmission - 6 Speed) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnostic Routines >> Engagement Concerns: No Forward and/or No Reverse

Engagement Concerns: No Forward and/or No Reverse

WARNING: This page is about a different car, the 2005 Mercury Montego and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
POSSIBLE COMPONENT AND REFERENCE/ACTION

Possible Component Reference/Action
207 - ROUTINE 
No Forward, No Reverse, No Forward or Reverse   
  • Shift linkage damaged or out of position
  • Using a diagnostic tool, check shift lever position.
  • Incorrect neutral switch position
  • Carry out neutral position learning. Refer to NEUTRAL POSITION LEARNING .
  • Disconnect the transmission control module (TCM) electrical connector. If concern still exists, this indicates an internal mechanical problem. Connect the TCM and carry out pressure checks.
  • If concern is resolved by disconnect the TCM, this indicates an electrical concern. Install a new TCM. Refer to TRANSMISSION CONTROL MODULE (TCM) . Check wiring harness (external and internal) valve body connections.
  • Halfshafts broken
scientia non olet · About LEMON Manuals