LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1077 (Engine) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Cylinder Head >> Disassembly

Cylinder Head: Disassembly

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the locations of the components removed.
  1. Remove the hydraulic lash adjusters.
  2. Using the special tools, remove the keys, retainer and spring.
    Fig 1: Removing Keys, Retainer And Spring
    G03898516Courtesy of FORD MOTOR CO.
  3. Remove the valve from the cylinder head.
  4. Remove the valve stem seal.
scientia non olet · About LEMON Manuals