LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Air Bag Restraint Systems) >> Removal & Installation >> Electronic Crash Sensor (ECS) Module >> Removal

Electronic Crash Sensor (ECS) Module: Removal

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . ECS module is located behind right cowl side kick trim panel. Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove right cowl side kick trim panel. Disengage ECS module connector locking clip and disconnect ECS module connector. Remove 3 ECS module mounting bolts and ECS module.
scientia non olet · About LEMON Manuals