LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Air Bag Restraint Systems) >> Diagnostics >> Clearing Fault Codes

Clearing Fault Codes

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Connect scan tool to Data Link Connector (DLC), located under instrument panel to right of steering column. Turn ignition switch to RUN position. Follow manufacturer's instructions for scan tool being used. Scan tool will retrieve DTCs again after clearing. If any DTCs remain, they will be displayed. Hard DTCs will be redisplayed after clearing DTCs, since they cannot be cleared from Electronic Crash Sensor (ECS) module.

scientia non olet · About LEMON Manuals