LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1064 (Noise, Vibration & Harshness) >> Description And Operation >> Acceptable Noise, Vibration and Harshness >> Glossary of Terms >> Camber

Glossary of Terms: Camber

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

The angle of the wheel in relation to the true vertical as measured looking from the front of the vehicle. Camber is positive when the wheel angle is offset so that the top of the wheel is positioned away from the vehicle.

Fig 1: Identifying Negative And Positive Camber Angle
G03878197Courtesy of FORD MOTOR CO.