LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Supplemental Inflatable Restraint System - F150 Pickup) >> Removal & Installation >> Seat Belt PRETENSIONERS >> Removal (With Seat Integrated Restraints)

Removal (With Seat Integrated Restraints)

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove appropriate front seat. See FRONT SEAT  .
  2. On models equipped with 60 percent front seat bench, unfasten front seat cover retainers located under front seat. Remove front seat cushion trim cover hog rings. Remove 60 percent front seat cushion. Remove nut and buckle/pretensioner assembly.
  3. On models equipped with captain and 40 percent front seat, disengage seat belt buckle/pretensioner electrical connector retainer. Remove nut and buckle/pretensioner assembly.
NOTE: When tightening seat belt buckle/pretensioner nut on 60 percent seat, ensure seat backrest pivot bolt does not turn with nut.
scientia non olet · About LEMON Manuals