LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1048 (Antenna System -- F150 Pickup) >> Removal And Installation >> Antenna Lead-In Cable >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio unit. For additional information, refer to AUDIO UNIT .
  2. Lower the glove compartment.
    • Press the side tabs and release the glove compartment.
  3. Disconnect the antenna lead-in cable from the antenna cable.
  4. Disconnect the pin-type retainers and remove the cable.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals