LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1045 (Parking Aid System -- F150 Pickup) >> Removal And Installation >> Parking Aid Sensor >> Installation

Parking Aid Sensor: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install the parking aid sensor in the rear bumper, insert the sensor in the opening until the retaining tabs lock in position.
  2. Connect the parking aid sensor electrical connector.
  3. After installing the sensor(s), use the diagnostic tool to verify that the parking aid sensor PIDs read no object present and that the parking aid sensor attenuation PIDs read between 0-16 ms.
scientia non olet · About LEMON Manuals