Safety Belt Warning Chime
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt warning chime warns the driver safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and when the ignition switch is turned from the OFF/LOCK or ACC to the RUN or START position. The safety belt warning chime stops sounding when:
- The safety belt is fastened.
- The ignition switch is switched from the RUN or START to the OFF/LOCK or ACC position.
- The chime has sounded for 6 seconds.
The safety belt warning chime inputs are:
- Ignition switch position
- Driver safety belt switch (grounded when not fastened, open circuit when fastened)