LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Air Bag Restraint Systems) >> Diagnostics >> Self-Diagnostics >> Switching From Diagnosis Mode To User Mode

Switching From Diagnosis Mode To User Mode

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

To switch from Diagnoses Mode to User Mode, turn ignition switch to OFF position for at least one second. Turn ignition switch to ON position. System will now be in User Mode. If diagnostic module is being replaced, air bag system will automatically start in User Mode.

scientia non olet · About LEMON Manuals