LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1039 (HVAC System - Control Components -- F150 Pickup) >> Removal And Installation >> In-Vehicle Temperature Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the 2 in-vehicle temperature sensor screws.
  3. Remove the temperature sensor finish panel.
  4. Remove the in-vehicle temperature sensor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals