LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1032 (Manual Transmission & Clutch - General Information -- F150 Pickup) >> General Procedures >> Dowels - Flywheel Housing to Block >> Removal

Dowels - Flywheel Housing to Block: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Take care not to damage the flywheel housing to block dowel holes or surface areas around the flywheel housing to block dowel hole during removal.
  1. Remove the flywheel housing-to-block dowel using a drift pin where the flywheel housing-to-block dowel is installed in an open hole, and locking pliers where the flywheel housing-to-block dowel is installed in a blind hole.
scientia non olet · About LEMON Manuals