LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Controls - Removal, Overhaul & Installation - ECONOLINE - NGV) >> Computerized Engine Controls >> Natural Gas Vehicle Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Econoline and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery ground cable. Remove retaining screws and position coolant recovery bottle aside. Remove Natural Gas Vehicle Module (NGV) module harness connector plastic shroud. Loosen retaining bolt and disconnect NGV module harness connector. Remove retaining screws and remove the NGV module assembly. To install, reverse removal procedure. Tighten bracket bolts and connector bolt to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals