LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Emission Control System -- F150 Pickup) >> Removal And Installation >> Positive Crankcase Ventilation (PCV) Valve - 4.2L >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the positive crankcase ventilation (PCV) valve electrical connector.
  3. Disconnect the quick connect couplings and remove the PCV tube. For additional information, refer to FUEL SYSTEM-GENERAL INFORMATION .
    4. NOTE: Anytime the PCV valve is removed, a new PCV valve must be installed.
  4. Rotate the PCV valve counterclockwise and remove the PCV valve.
    • Discard the PCV valve.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals