LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1019 (Wiper System & Washer System -- F150 Pickup) >> Removal And Installation >> Windshield Wiper Motor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper pivot arms. For additional information, refer to WIPER PIVOT ARM .
  2. Remove the cowl grille panel. For additional information, REFER to FRONT END BODY PANELS .
  3. Disconnect the windshield wiper motor electrical connector.
  4. Remove the 3 windshield wiper motor assembly bolts.
    • To install, tighten to 8 Nm (71 lb-in).
  5. Remove the windshield wiper motor assembly.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals