Normal Operation
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
As part of the SRS, the safety belt buckles are equipped with Hall-effect switches. The safety belt switches indicate to the RCM whether the safety belts are buckled or unbuckled. Refer to AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM SRS .
The RESTRAINTS CONTROL MODULE RCM checks the driver safety belt buckle switch circuits for faults. If the RCM detects an open circuit or short to voltage fault, it will store diagnostic trouble code (DTC) B2691 in memory and flash lamp fault code (LFC) 51 (or higher priority code if one exists) on the air bag indicator.