LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1015 (Supplemental Inflatable Restraint System -- F150 Pickup) >> Diagnosis And Testing >> Pinpoint Tests - Air Bag and Safety Belt Pretensioner Supplemental Restraint System SRS >> Pinpoint Test N: LFC 51/DTC B2435 - Driver Safety Belt Buckle Switch Circuit Resistance Out of Range >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

A driver safety belt buckle switch current out-of-range fault can be caused by:

NOTE: Most faults are due to connector and/or wiring concerns. Carry out a thorough Inspection and Verification before proceeding with the pinpoint test.
scientia non olet · About LEMON Manuals