Safety Belt Buckle Switch
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
As part of the supplemental restraint system SRS, the driver and front outboard passenger safety belt buckles are equipped with a Hall-effect switch. The safety belt switches indicate to the restraints control module (RCM) whether the safety belt buckles are buckled or unbuckled.
The RCM uses this information in determining the deployment rate of the dual-stage driver and passenger air bag modules.
The safety belt switches are also used for the driver safety belt warning system and the driver Belt Minder and passenger Belt Minder (if equipped). For additional information, REFER to SAFETY BELT SYSTEM and WARNING DEVICES or the owner's literature.