LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Exterior Lighting System -- F150 Pickup) >> Removal And Installation >> Stoplamp Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to CHARGING SYSTEM - GENERAL INFORMATION .
  2. Detach the stoplamp switch electrical connector.
  3. Disconnect the retainer.
  4. Remove the pin.
  5. Remove the stoplamp switch.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals