LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Exterior Lighting System -- F150 Pickup) >> Diagnosis And Testing >> Turn Signal and Hazard Lamps >> Pinpoint Test N: The Hazard Lamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The indicator flasher relay receives battery power through circuit 10 (LG/RD). The indicator flasher provides power to the multifunction switch through circuit 385 (WH/RD). Circuit 57 (BK) provides ground for the indicator flasher. When the hazard switch is turned on, the multifunction switch routes voltage to the turn/hazard lamps. The timed ON/OFF cycle is determined in the indicator flasher relay and is set to flash approximately 80 times per minute when the hazard switch is turned on.

scientia non olet · About LEMON Manuals