LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Exterior Lighting System -- F150 Pickup) >> Diagnosis And Testing >> Stoplamps >> Pinpoint Test I: The Stoplamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The stoplamp switch is supplied battery voltage through circuit 10 (LG/RD). When the brake pedal is pressed, the stoplamp switch routes voltage to circuit 511 (LG). Circuit 511 (LG) supplies power to the multifunction switch and the high mounted stoplamp. The multifunction switch internally routes the power (when in the NEUTRAL position) to circuits 9 (LG/OG) (LH stoplamp) and 5 (OG/LB) (RH stoplamp). Circuits 9 (LG/OG) and 5 (OG/LB) are routed through the CJB and then on to the LH and RH stoplamps accordingly.

scientia non olet · About LEMON Manuals