LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Instrument Panel And Console -- F150 Pickup) >> Removal And Installation >> Instrument Cluster Finish Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column opening trim screws.
  2. Remove the steering column opening trim.
  3. Remove the steering column cover. For additional information, refer to STEERING COLUMN COVER .
  4. Remove the instrument cluster finish panel screws.
  5. Remove the instrument cluster finish panel.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals