LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Instrument Panel And Console -- F150 Pickup) >> Removal And Installation >> Instrument Cluster Center Finish Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 steering column opening trim screws.
  2. Remove the steering column opening trim.
  3. Remove the steering column cover. For additional information, refer to STEERING COLUMN COVER .
  4. Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL CENTER FINISH PANEL .
  5. Remove the 2 instrument cluster finish panel screws.
  6. Remove the instrument cluster finish panel.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals