LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Instrument Panel And Console -- F150 Pickup) >> Removal And Installation >> Console - Floor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 floor trim panel push pins.
  2. Remove the 2 floor trim panels.
  3. Remove the shifter trim panel.
  4. Disconnect the shifter cable.
  5. Disconnect the floor console electrical connector.
  6. Remove the 4 floor console bolts.
    • To install, tighten to 6 Nm (53 lb-in).
  7. Remove the floor console.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals