LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1010 (Interior Trim And Ornamentation -- F150 Pickup) >> Removal And Installation >> B-Pillar Trim Panel - Super Crew >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door scuff plate.
  2. Remove the B-pillar bolt cover.
  3. Remove the safety belt trim cover.
  4. Remove the B-pillar bolt.
  5. Remove the safety belt nut.
    • To install, tighten to 48 Nm (35 lb-ft).
  6. Remove the safety belt anchor bolt.
    • To install, tighten to 48 Nm (35 lb-ft).
  7. Remove the rear door scuff plate.
  8. Position the front seat forward.
  9. Pull the safety belt through the B-pillar trim panel.
  10. Remove the B-pillar trim panel.
  11. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals