LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1007 (Anti-Lock Brake System -- F150 Pickup) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Test D: DTC C1300 - Anti-lock Brake System (ABS) Hydraulic Pump Motor Circuit Failure >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The operating voltage required to run the hydraulic pump motor is between 10 and 17 volts.

Voltage is supplied by circuit 534 (YE/LG) (voltage at all times). Ground is provided through circuit 57 (BK).

scientia non olet · About LEMON Manuals