Parking Brake Shoes: Removal
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
One parking brake shoe kit contains the linings required for both the LH and RH side.
- Relieve the tension on the parking brake cable. For additional information, refer to PARKING BRAKE CABLE TENSION RELEASE .
- Remove the rear brake disc. For additional information, refer to REAR DISC BRAKE .
- Remove the brake shoe adjuster screw.
- Remove the brake shoe adjuster screw spring.
- Remove the 2 brake shoe hold-down springs and 2 pins.
- Remove the brake shoe retracting spring and the parking brake shoes.
NOTE:
Make sure the parking brake control is fully released.