LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1004 (Parking Brake System & Actuation -- F150 Pickup) >> Removal And Installation >> Parking Brake Cable - Rear, LH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve the parking brake cable tension. For additional information, refer to PARKING BRAKE CABLE TENSION RELEASE .
  2. Release the intermediate cable from the LH rear cable from the cable equalizer.
  3. Release the front of the LH rear cable conduit at the frame bracket.
  4. Remove and discard the double cable clamp.
  5. Disconnect the LH rear parking brake cable from the rear parking brake levers and remove the cable from the vehicle.
  6. To install, reverse the removal procedure.
    • Inspect the parking brake system for correct operation.
scientia non olet · About LEMON Manuals